12.8V Automatic Rebar Tying Machine Rebar Tier Tool Strapping 8mm-34mm Wrench
- Stock: In Stock
- Model: 1306353
$283.49
Ex Tax: $283.49
8-34mm Automatic Handheld Rebar Tier Tool Building Tying Machine Strapping
ÂÂ
Specifications:
Color: Yellow / Blue Random Send
Material: Plastic + Metal
Voltage: 12.8V
Battery: Lithium Ion Batteries
Battery Capacity: 13200Mah
Battery Charging Time: 1.5 hours full filling
Tying Wire Diameter: 0.8mm
Tying Wire Length: more than 110 m
Applicable Scope Of Steel Strapping: 8mm - 34mm
Knot Wire Length: 300 - 500mm
Knot Number Per Charge: 1500 times
Knot The Required Time: 0.8 seconds at a time
Charger Plug: China National Standard Plug (we will send you the suitable adapter according to your location)
ÂÂ
Features:
ÂÂ
ÂÂ
✆Compact size, lightweight, easy to grab.
✆It can save 3-5 times than man power by hand.
✆Rebar Tier is a hand held machine used to pack rebars quickly.
✆It is a miniature motor tool has the trait of safety and credibility.
✆Used for building market, including civil building, floor pipe, heating floor mesh, steel bar, etc.
✆Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance.
ÂÂ
ÂÂ
Package Included:
ÂÂ
ÂÂ
1X Tying Machine
1X Pliers
1X Charger (we will send you the suitable adapter according to your location)
1X Storage Box
2X Lithium Ion Batteries
1X Tying Wire (Tying Wire Standard: About 0.8 mm x 110 m/roll)
ÂÂ
Tying Wire Installations:
ÂÂ
ÂÂ
1. In the state of start-up, press the locking plate of the opening wire plate, open the plate cover.
2. Take out the tying wire, tear the packaging film, pull straight wire head about 10 cm, load into the binding machine in the clockwise direction, the wire head into the guide tap tube.
Note: Clench the wire plate when tear the packaging film, do not let the wire loose. If the wire is free to disperse, it will lead to the spread of the wire stuck in the wire plate.
3. Insert the head of the wire guide into the tap pipe until it is resisted.
4. Cover the plate and fasten the locking piece.
5. Pinch the wire forward with two fingers, press and hold the switch and send the wire out.
6. If you want to take out the wire plate when finished, press and hold the locking piece, open the wire plate cover plate, holding the wire tray to the side and pull out.
ÂÂ
Operation Instructions:
1. The rebar tirer's jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles.
Note: There can be no barrier between the mouth of the jaws and the wire.
2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off)
Note: Press one button at a time, do not probe the jaws at work.
3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.
4. When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding.
ÂÂ
Operating Skills:
ÂÂ
ÂÂ
1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding.
2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.
ÂÂ
Maintenance:
ÂÂ
ÂÂ
1. Clean the machine regularly, keep the wire mouth clean.
2. This product can not be placed randomly, so as not to cause damage to parts.
3. Batteries must not be placed together with other metal objects to avoid short circuit.
4. Non-professional do not disassemble the machine arbitrarily, lest cause damage.
5. When you encounter an unresolved failure, please give it to the professional repair.
ÂÂ
ÂÂ
ÂÂ
Package Included:
ÂÂ
ÂÂ
1X Tying Machine
1X Pliers
1X Charger (we will send you the suitable adapter according to your location)
1X Storage Box
2X Lithium Ion Batteries
1X Tying Wire (Tying Wire Standard: About 0.8 mm x 110 m/roll)
Shipping Methods:
We provide FREE SHIPPING to worldwide with NO MINIMUM purchase required for all orders at iglustore.com.com. You also can choose your preferred shipping methods on the Order Information page during the checkout process. Please note for EMS, Expedited Shipping, you should pay the extra shipping fee. iglustore.com offers different shipping methods for you:
Shipping from Chinese Warehouse： Airmail and register airmail Area time United States, Canada, Netherlands, Spain, Germany, France, Japan, Republic of Korea, United Kingdom 7-15 business days Australia ,New Zealand, Singapore
7-15 business days Belgium, Denmark, Finland, Ireland, Norway, Portugal, Sweden, Switzerland 7-20 business days Brazil, Russia, Mexico 15-35 business days Other countries 7-25 business days EMS All countries except those listed below 6-8 business days Brazil and Russia 10-25 business days Expedited Shipping*(DHL) 3-7business days to worldwide. 3-7 business days Shipping from Local Warehouses: Warehouses Shipping Type Shipping Time Country UK Warehouse Royal mail 5-12 business days UK & Other EU countries UPS 3-7 business days US Warehouse USPS 3-6 business days United States, Canada UPS 2-5 business days DE Warehouse DHL 3-8 business days DE & Other EU countries.
FR Warehouse Express 2-5 business days France & Other EU countries ES Warehouse Unipost 2-15 business days ES & Other EU countries Express 3-7 business days The transit time depends on where you're located and where your package comes from. If you want to know more information, please contact our customer service team. We will settle your problem as soon as possible. Enjoy your shopping!
Payment Methods:
iglustore.com accepts PayPal and Credit Card as secure payment methods:
1. PayPal
1) Login To Your Account or use Credit Card Express.
2) Enter your Card Details, the order will be shipped to your PayPal address. And click “Submit”.
3) Your Payment will be processed and a receipt will be sent to your email inbox.
